EFLITE EXTRA 300SX 3D

Availability:

In Stock!


39,500.00

In Stock!

Overview

For nearly 30 years the full-scale Extra 300 has been mesmerizing audiences at air shows around the world. Flyzone’s first truly 3D-capable model pays homage to this legendary performer, combining a powerful brushless motor and ESC with an extremely high power-to-weight ratio. The result? An airplane that excels at everything from solid sport flying and precision aerobatics to impressive vertical performance and heart-pumping high alpha maneuvers. If you’re an experienced pilot ready to expand your flight envelope, the Extra 300SX Rx-R is the plane to take you there!

Features

  • Construction: AeroCell foam with large double beveled control surfaces
  • Wing: One-piece
  • Aileron Control: Dual servo
  • Motor: 30-35-1000kV brushless outrunner
  • Electronic Speed Control: 30A with star connector, 3A BEC
  • Servos: Four micro
  • Canopy: Molded clear plastic with magnetically attached AeroCell foam hatch, dashboard decal and pilot helmet
  • Propeller: 10×4.5 black plastic
  • Landing Gear: Prebent wire with 2″ (51mm) foam main wheels and .75″ (19mm) steerable tailwheel, magnetically attached landing gear covers and wheel pants that pop off during rough landings to avoid damage
  • Spinner: 1.25″ (44mm) diameter red plastic

Needed to Complete

  • Radio: At least 4 channel transmitter and receiver
  • LiPo Battery: 3S 11.1V 1800-2200mAh 30C
  • LiPo charger and charging bag
  • Maintenance and field equipment

What’s in the box?

  • (1) Flyzone Rx-R Extra 300SX 3D Airplane with Motor, ESC, four Servos, Y-Harness, Landing Gear, Wheels, Covers and Wheel Pants, Spinner and Decals
  • (1) User Manual

Specifications

  • Wingspan: 41.5″ (1055mm)
  • Wing Area: 297 sq in (19.2 sq dm)
  • Weight: 28 – 31 oz (795 – 880 g)
  • Wing Loading: 13.6-15.0 oz/sq ft (42-46 g/sq dm)
  • Length: 34.5″ (875mm)
  • Center of Gravity (CG): 2-1/2″ – 3-1/4″ (64mm – 83mm) back from the leading edge of the wing at the fuselage side
  • Control Throws: Low Rate   /   High Rate   /   3D
  • Elevator: 3/8″ (10mm) 8° 5/8″ (16mm) 14° 1-3/4″ (44mm) 35°
  • Rudder: 1-1/4″ (32mm) 20.5° 1-3/4″ (44mm) 27.5° 2-1/4″ (57mm) 34°
  • Aileron: 1/4″ (6mm) 7.5° 3/8″ (19mm) 11° 3/4″ (19mm) 21°
SKU: FLZA3024 Category:

Brand

E-FILTE

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “EFLITE EXTRA 300SX 3D”

There are no reviews yet.

SHOPPING CART

close